Peak Design Capture Camera Clip V2 - 2050184 _{Yêu thích}

PEAK DESIGN CAPTURE CAMERA CLIP V2 (WITH STANDARD PLATE) 

The Capture Camera Clip V2 from Peak Design is a camera holstering system that securely holds your camera without the traditional camera strap. The system is made of up a clip and a quick release plate, which together can support up to 100 lb. The quick release plate is compatible with all Arca-type clamps. The clip can attach to any backpack strap, bag, or belt less than 3" wide. It is ideal for photographers who need their hands free and also need instant access to their camera.

To use the system, attach the quick release plate to your camera, clamp the clip around a strap or belt, and secure in place by tightening the two hand-tightened bolts. Your camera slides into the clip, locks in place, and will not detach until you push the quick release button to release it from the clip.

The CapturePro comes with a 4mm hex wrench for securely installing your plate on the camera and a microfiber pouch for storing your clip when it is not in use.